Self Aligning Ball Bearings
Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.
A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection.
- NSK 1216J Self Aligning Ball Bearings
- 75 mm
- 160 mm
- NSK 1215J Self Aligning Ball Bearings
- 55.000 mm
- 100.0000 mm
- NSK 1214J Self Aligning Ball Bearings
- NSK
- 1214J
- NSK 1212TN Self Aligning Ball Bearings
- Single Row
- Open
- NSK 2310TN Self Aligning Ball Bearings
- 12.000 mm
- 37.0000 mm
- NSK 1226M Self Aligning Ball Bearings
- 120 mm
- 215 mm
- NSK 1220KJ Self Aligning Ball Bearings
- 1120 mm
- 1540 mm
- NSK 1222J Self Aligning Ball Bearings
- 360 mm
- 480 mm
- NSK 1220J Self Aligning Ball Bearings
- 220.000 mm
- 350.0000 mm
- NSK 1218KJ Self Aligning Ball Bearings
- 150 mm
- 225 mm
- NSK 1218J Self Aligning Ball Bearings
- 1060.355 mm
- 1400 mm
- NSK 1217KJ Self Aligning Ball Bearings
- 320 mm
- 480 mm