797/1370G Cross Roller Slewing Bearing
With over 10170 full-service stores, our 797/1370G Cross Roller Slewing Bearing Take Up Units Category inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize N/A Minimum Buy Quantity your productivity by GARLOCK BEARINGS LTD saving time and your hard-earned dollars.
Product Details
| Category | Take Up Units |
| Inventory | 0.0 |
| Minimum Buy Quantity | N/A |
| Weight | 10 lb |
| Product Group | M06288 |
| Component Description | Take Up Bearing Only |
| Rolling Element | Tapered Roller Bearing |
| Housing Style | Unit Only |
| Mounting Method | Concentric Collar |
| Compatible Take Up Frame | Not Specified |
| Housing Material | Cast Iron |
| Other Features | Double Row | Double Collar | Wide Slot | Two Lip Seal | Electrodeposition Coating | With Set Screw |
| Inch - Metric | Inch |
| Long Description | Take Up Bearing Only; 1-1/2" Bore; 17/32" Slot Width; 3-1/2" Slot to Slot Distance; Tapered Roller Bearing; Unit Only; Concentric Collar Mount; Cast Iron Housing Material |
| UNSPSC | 31171533 |
| Harmonized Tariff Code | 8483.20.40.80 |
| Noun | Bearing |
| Keyword String | Take Up |
| Weight / LBS | 10 |
| d | 1.5 Inch | 38.1 Millimeter |
| Slot Width | 0.531 Inch | 13.5 Millimeter |
| Slot to Slot Distance | 3.5 Inch | 88.9 Millimeter |
| Shaft Size | 1.5 in |
| Shaft Size Type | Imperial |
| UPC Code | 053893532585 |
| Dimension B | 3-3/8 in |
| Dimension L | 6 in |
| Dimension A1 | 11/16 in |
| Dimension L3 | 3-1/4 in |
| Dimension L1 | 3-13/16 in |
| Dimension N | 1-1/8 in |
| Dimension L2 | 15/16 in |
| Dimension N1 | 3/4 in |
| Dimension H2 | 3-5/16 in |
| Dimension N2 | 1-15/16 in |
| Dimension d1 | 3-3/16 in |
| Dimension H1 | 4 in |
| Dimension H | 4-3/4 in |
| Dimension A2 | 2-5/16 in |
| e | 0.44 |
| X (if Fa/Fr ≤ e) | 0.87 |
| Y (if Fa/Fr ≤ e) | 1.96 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr > e) | 2.37 |
| K Factor | 1.36 |
| C90 Dynamic Load Rating1 | 7860 lb |
| C0 Static Load Rating | 33000 lb |
| Fa-max Maximum Permissible Thrust Load2 | 2590 lb |
| Fr-max Maximum Allowable Slip Fit Radial Load3 | 6400 lb |
| Max. Speed4 | 3320 rpm |
| Note | Note: All units have a 1/8 pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occur |
Recommended Products
-
012.40.800 External Teeth UWE Slewing Bearing/slewing Ring -
011.30.800 External Teeth UWE Slewing Bearing/slewing Ring -
012.30.800 External Teeth UWE Slewing Bearing/slewing Ring -
011.40.900 External Teeth UWE Slewing Bearing/slewing Ring -
012.40.900 External Teeth UWE Slewing Bearing/slewing Ring -
011.30.900 External Teeth UWE Slewing Bearing/slewing Ring