2.756 Inch | 70 Millimeter x 5.906 Inch | 150 Millimeter x 2.5 Inch | 63.5 Millimeter SKF 3314 ANR/C3 Angular Contact Ball Bearings

Da min:417 mm; D:460 mm; Cb min:19 mm; a:90.5 mm; Characteristic cage frequency, FTF:0.46 Hz; ra max:3 mm; db min:358 mm; r1s min:3 mm; C:57 mm; Nlim (grease):630 rpm;

d:20 mm; Designation of bearing:ES204G2T04; B1:30.9 mm; Z:26.5 mm; L:86 mm; T min.:-40 °C; s1:24.2 mm; e:19 mm; A2:42.4 mm; Designation of housing:FE204N-;

Min operating temperature, Tmin:-20 °C; Manufacturer Name:NTN; Inventory:0.0; Nlim (oil):9,000 rpm; F:54.5 mm; rs min:1.1 mm; d1:58.9 mm; B:19 mm; Characteristic inner ring frequency, BPFI:8.76 Hz; Minimum Buy Quantity:N/A;

L:195 mm; T min.:-20 °C; d1:98 mm; s1:42.5 mm; A2:81.5 mm; B1:73 mm; e:39 mm; Weight:10.3 kg; Adapter sleeve reference:H2315-40; J:260 mm;

C0:11.2 kN; B1:48.3 mm; C1:5 mm; D:62 mm; B:36.4 mm; d1:44.1 mm; S:18.2 mm; Recommended tightening torque for set screw:8 Nm; m:6 mm; C:19 mm;

Brand:Baldor-Dodge; Housing Series:407 SERIES (407 - 40; Housing Product Type:K / DI; Expansion Type:Non-Expansion; Seal Type:Triple Lip; UPC:782475725441; Shaft Attachment Type:SETSCREW; Base to Center Hight Numeric:5.7500 in; Bearing Locking Device:Setscrew; Bearing Series:407 Series;

Y0:1.1; Y2:2; D:45.24 mm; Nlim (oil):12,000 rpm; Characteristic inner ring frequency, BPFI:8.32 Hz; Mass:0.12 kg; Static load, C0:28.6 kN; r1s min:1.3 mm; Max operating temperature, Tmax:120 °C; rs min:1.3 mm;

Designation of bearing:EX202-10G2T04; N:11mm; d1:32.4 mm; Weight:0.67 kg; T max.:100 °C; H1:14.5 mm; B:34 mm; G:R1/8"; L1:40 mm; Recommended tightening torque for set screw:3.7 Nm;

d:20 mm; Dz:54 mm; A1:12 mm; N1:16 mm; L:94 mm; L3:51 mm; N2:32 mm; P:150 mm; Z:62.7 mm; C0:6.65 kN;

ra max:2.5 mm; Brand:SNR; d2:200.8 mm; Nlim:1,700 rpm; Mass:33.9 kg; Y2:2.66; rs min:3 mm; Min operating temperature, Tmin:-40 °C; Characteristic inner ring frequency, BPFI:11.33 Hz; d:180 mm;

Dz:132 mm; SW:6 mm; L3:121 mm; Z:90.6 mm; A1:26 mm; L:224 mm; T min.:-20 °C; S:25.4 mm; s1:32.55 mm; d:65 mm;

N1:14 mm; L:119 mm; s1:23.05 mm; H2:54 mm; G:M6x1; J:88.5 mm; d:15.88 mm; A1:20.5 mm; H:27 mm; S:6.5 mm;

N:17mm; L1:58 mm; Designation of housing:PH208-; s1:24.6 mm; H2:149 mm; C0:18.2 kN; T min.:-20 °C; G:M6x1; d:38.1 mm; J:137 mm;

Recommended tightening torque for set screw:3.7 Nm; H1:15 mm; H2:70 mm; C0:7.88 kN; L1:25 mm; d:22.22 mm; G:M6x1; Designation of housing:PG205-; Weight:0.71 kg; T min.:-20 °C;

Bearing Series:218 Series; Retainer Type:Std Retainer; Bearing Outer Ring Material:Steel; Ball Grade:Class 10; Expansion Type:Non-Expansion; Base to Center Height:Not Applicable; UPC:782475900275; Shaft Attachment (2):D-Lock; Retainer Material:Nylon; Flinger Material:Steel;